Gildan Women's Softstyle Midweight Tee 65000L

Custom Printed Gildan 65000L Women's Softstyle Midweight Tee

The Gildan 65000L is a 5.3-ounce, 100% ring spun cotton women's tee - Softstyle's midweight body, built with high stitch density fabric for a smooth printing surface. Companies order it decorated when a lightweight tee will not last the season and a heavy cotton tee feels stiff: hotel housekeeping, catering, school staff, warehouse offices. Wholesale Caps and Embroidery prints and embroiders it in-house at our Houston, TX facility, decorating apparel since 1979.

This is the best printing surface in the Softstyle family. High stitch density means the knit is tight enough that DTF (direct-to-film) prints sit on a smooth plane - fine type, thin outlines and halftone shading all survive, with no minimum order and full support for photographic and multi-color designs. Left chest embroidery is available too, and the 5.3-ounce body supports stitches without the puckering you see on lighter tees, at a 6-piece minimum.

Product Features

• 5.3-ounce, 100% ring spun cotton - midweight, not lightweight
• High stitch density fabric for a smooth printing surface
• Semi-fitted, side-seamed body
• Narrow width rib collar
• Taped neck and shoulders
• Recycled, high-performing black tear-away label; 11 colors, S through 3XL

Why Buyers Pick It

Weight is the deciding factor. A 4.5-ounce tee is soft but thins out after a season of industrial laundry; a 6-ounce heavy cotton tee lasts but wears warm and stiff. At 5.3 ounces of ring spun cotton this one sits in the middle - soft enough that staff will wear it all shift, heavy enough that it is not see-through and does not go limp after twenty washes. If you have replaced shirts mid-year before, this is the weight that stops it happening.

Sizing

Sizes are S through 3XL, extended 2XL and 3XL on the same order. The body is semi-fitted and side seamed with a narrow rib collar. Mix the size run to match your roster - DTF-printed shirts have no quantity tier to reach, while embroidered shirts need at least 6 pieces total, also mixable across sizes. If you want to compare weights before committing, order one 65000L and one Softstyle 64000L as single DTF-printed pieces and feel the difference. More in women's T-shirts.

How to Order

DTF-printed orders on this shirt have no minimum - order a single piece if that is all you need, or a few hundred for a full staff rollout, the price per piece is the only thing that changes. Embroidered orders need a minimum of 6 pieces, mixable across sizes and colors. Send your logo in any format you have and we return a free digital mockup showing size, placement and ink or thread colors. Nothing goes to production until you approve it. Production runs 7-10 business days from proof approval, rush is available on request, and ground shipping is free on most orders.

Frequently Asked Questions

What are custom Gildan 65000L Softstyle midweight tees?
They are 5.3-ounce, 100% ring spun cotton women's tees decorated with your logo by Wholesale Caps and Embroidery. We are a decorator - we DTF print and embroider in-house at our Houston, TX facility, and have been decorating apparel since 1979.

Is there a minimum order on the 65000L?
It depends on the decoration method. DTF-printed shirts have no minimum - you can order one piece, a single shirt for a sample, a replacement for a new hire, or one shirt to check the fit before you commit to a size run. Embroidered shirts carry a 6-piece minimum, mixable across sizes and colors. Embroidered caps carry a separate 12-cap minimum, while every shirt on this page follows the rule above.

How is the midweight different from standard Softstyle?
Standard Softstyle is 4.5 ounces; this is 5.3 ounces of the same 100% ring spun cotton. It holds up better to frequent washing and is less transparent in light colors, while keeping the soft ring spun hand. Both are semi-fitted and side seamed, and both run S through 3XL.

Is this a good shirt for detailed artwork?
Yes. The high stitch density fabric is specifically built to give a smooth printing surface, so DTF-printed fine lines and halftones hold and embroidered logos come off clean. We show the exact print size, placement and color match on a free digital mockup before production starts.

Do you keep my artwork on file for reorders?
Yes. Once your logo is digitized for embroidery or set up as a DTF file, we keep it on file at our Houston facility. Reorders skip setup entirely - you tell us the style, colors and size run, and we print from the file we already have. That keeps a second run cheaper and keeps your logo identical from the first shirt to the five hundredth.

Can the same logo go on other styles?
Yes, and it is a common request. Hotels and caterers commonly split one logo across midweight tees for floor staff and polos for supervisors. Mixing categories is fine on one order too - shirts, polos and embroidered caps can all carry the same mark. Just note that DTF-printed shirts have no minimum, embroidered shirts need at least 6 pieces, and caps are ordered in multiples of 12.

How long does production take?
Production is 7-10 business days from the moment you approve the digital mockup, and ground shipping on most orders is free. Rush production is available on request - tell us your event date when you send the artwork and we will confirm what is possible before you pay. Reorders from artwork already on file usually move faster because there is no setup step.

Send your artwork for a free digital mockup on the Gildan 65000L. Buy one shirt or a full staff run - browse women's T-shirts and Gildan T-shirts.